1998.5-2002 INSTALLATION GUIDE GlowShift.com © GlowShift Gauges, LLC | All Rights Reserved 8 DODGE RAM 24V 5.9L CUMMINS Connecting to Power SECTION 7 1. Attach expandable circuits to both the yellow wire and the red wire. 2. Remove the fuse from fuse location 14 for the cluster B circuit. Plug the fuse into the open section of the expandable circuit for the yellow wire and install it in the fuse box. 3. Remove the fuse from fuse location 8 for the radio circuit. Plug the fuse into the open section of the expandable circuit for the red wire and install it in the fuse box. 4. Using a #2 Phillips-head screwdriver, remove the cup holder and ashtray slides and carefully remove the dash trim. Remove the headlight switch as well. 5. Route the orange wire to the headlight switch: OPTION A: PUSH/PULL STYLE HEADLIGHT SWITCH ASSEMBLY 1. Using a #2 Phillips head screwdriver, remove the screw at the power plug and carefully remove the dash trim and headlight switch. 2. Route the orange wire to the headlight switch. Splice into the solid green wire to obtain the correct voltage for the dimming feature of the gauges. 3. Reinstall the headlight switch and the dash trim. 2.–3. A2. A3.