1994-1997 INSTALLATION GUIDE 7 GlowShift.com © GlowShift Gauges, LLC | All Rights Reserved DODGE RAM 12V CUMMINS Reconnect the negative terminals of the two batteries to prepare power for the gauges and to test the fuses for power with a Test Light. 1. Attach expandable circuits to both the yellow wire and the red wire. 2. Remove the fuse from fuse location 18 for the park lamp circuit. Plug the fuse into the open section of the expandable circuit for the yellow wire and install in the fuse box. 3. Remove the fuse from fuse location 7 for the radio circuit. Plug the fuse into the open section of the expandable circuit for the red wire and install in the fuse box. 4. Using a #2 Phillips head screwdriver, remove the cup holder and ashtray slides and carefully remove the dash trim. Remove the headlight switch as well. 5. Route the orange wire to the headlight switch. Splice into the black wire with a yellow stripe to obtain the correct voltage for the dimming feature of the gauges. 6. Secure any excess wiring with Zip Ties. 7. Reinstall the headlight switch and dash trim. 8. Connect the black wire to a reliable, clean and unpainted ground source. Connecting to Power SECTION 7 1 2 R1 R2 CB2 CB1 22 21 R3 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 2.-3. 5. 8. Continued on Next Page 2.-3.
RkJQdWJsaXNoZXIy MTIxODAy