1995-1998 INSTALLATION GUIDE 9 GlowShift.com © GlowShift Gauges, LLC | All Rights Reserved 6.5L TURBO DIESEL 1. Reconnect the negative terminals of both batteries to provide power. 2. Remove the dashboard side cover to gain more access by unclipping the spring tabs. 3. Route the yellow and red wires to the Passenger Compartment Fuse Box. 4. Using an Expandable Circuit, connect the yellow constant wire to fuse #13 which is labeled 20A CIG-LTR. 5. Once again using an Expandable Circuit, connect the red ignition switch wire to fuse #17 which is labeled 10A RADIO. 6. Unclip the gauge cluster trim panel to gain access to the headlight switch, and connect the orange wire to the brown wire in Terminal S, which is a headlamp source on the back of the headlight switch. 7. Connect the black ground wire to a clean, reliable grounding source underneath the dashboard. 8. Reinstall the Dashboard Side Cover. 9. Power the truck on to see if the gauges are functioning properly and check for any leaks or loose sensor connections. Top off any fluids if necessary. 10. Press the color changing button on the gauge to ensure it is working correctly. 11. Test drive your vehicle to ensure all gauges are functioning properly. Connecting to Power SECTION 8 A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 20 20 10 10 10 20 10 10 25 25 20 20 10 20 10 10 10 10 25 25 B 4. 5. 9.
RkJQdWJsaXNoZXIy MTIxODAy