1995-1998 INSTALLATION GUIDE 1 GlowShift.com © GlowShift Gauges, LLC | All Rights Reserved 6.5L TURBO DIESEL Preparing The Installation SECTION 1 This Diesel Gauge Set Installation Guide will feature the installation of the GlowShift 7 Color Series Diesel Gauge Set into your ‘95- ’98 Chevy/GMC 2500 or 3500 with a 6.5L Turbo Diesel. For the purpose of the installation, a three-gauge Triple Pillar Pod will be featured, and you will have the choice between GlowShift’s Boost, Pyrometer EGT, Transmission Temperature and Fuel Pressure Gauges. 1. Open the hood and locate the truck’s two batteries. Using an 8mm Wrench, disconnect the negative terminal of each battery to ensure there is no power running through the truck during the installation. When it comes time to wire and connect the gauges to their power source, you will be able to reconnect power to the negative terminals of the batteries. 2. Remove the driver’s side factory A-pillar trim by releasing the spring clips. The triple pillar gauge pod you will be installing is an overlay. 3. Now that you have the power disconnected from your truck and your factory A-pillar has been removed, proceed with the installation. 1. 2. 3.
RkJQdWJsaXNoZXIy MTIxODAy