07-13 GM Duramax Install Gauge Install Guide for Chevy Silverado and GMC Sierra Duramax

2007-2013 INSTALLATION GUIDE GlowShift.com © GlowShift Gauges, LLC | All Rights Reserved GMC SIERRA CHEVY SILVERADO DURAMAX TABLE OF CONTENTS SECTION 1 Boost Gauge Installation 1 SECTION 2 EGT Gauge Installation 2 SECTION 3 Fuel Pressure Gauge Installation 3 SECTION 4 Trans Temperature Gauge Installation 4 SECTION 5 Rail Pressure Gauge Installation 6 SECTION 6 Installing the Pillar Pod 7 SECTION 7 Connecting to Power 8 TOOLS & ACCESSORIES NOT INCLUDED OPTIONAL ADD-ONS AND ADAPTERS SOLD SEPARATELY AT GLOWSHIFT.COM • 3 Gauge Wiring Kit • Mini Expandable Circuits • 1/8-27 NPT Drill and Tap set • 5/8” Transmission Line T-Fitting Adapter for Allison 1000 • Shop Vacuum • Pen Magnet • Pipe Cutter • Panel Pop Tool • Cutting Oil • Pick Tool • Zip-Ties • Grommet • Drain Pan • Teflon Tape • Wire Connectors • Anti-Seize • Transmission Fluid • Allison 1000 Transmission Test Port Adapter • Fuel Rail Pressure Gauge Wiring Harness • 18’ Extended Sensor Harness • Safety Glasses & Gloves • Assorted Wrenches • Socket Set • Flat Head Screwdriver • Phillips Screwdriver • Center Punch • Marker • Tape Measure • Drill & Drill Bits • Tap Handle • Multi-Meter/Test Light • Wire Strippers & Crimper • Deburring Tool • Hose Cutters GlowShift Installation Guides are designed so that you don’t need to be a professional mechanic to install our products. Whether you’re a beginner or a seasoned pro, we’ll walk any Do-It-Yourselfer through every step of the process for installing our gauges, gauge pods and accessories. The custom gauge package featured in this guide is a popular combination gauge and pod set for the 2007-2013 Chevrolet Silverado & GMC Sierra 6.6L Duramax. Before getting started, confirm you have the tools and accessories below and let’s get to work. For MaxTow® Gauges, the wire colors on the gauge power harnesses are different than what appears in this installation guide. Additionally, for the Boost Gauge, please follow the same steps but instead of installing the brass compression fittings and boost line, thread the 1/8-27 NPT boost sensor into your desired location and tighten with a 22mm Wrench. Please note that in some applications additional adapters may also be required. CHECK OUT THE FULL INSTALL VIDEO FOR THIS DURAMAX: GLOWSHIFT.COM/0713DMAX