GlowShift | 1999-2007 Ford Super Duty 7.3L / 6.0L Powerstroke Installation Guide

1999-2007 INSTALLATION GUIDE GlowShift.com © GlowShift Gauges, LLC | All Rights Reserved FORD SUPER DUTY 7.3/6.0 POWER STROKE TABLE OF CONTENTS SECTION 1 Boost Gauge Installation 1 SECTION 2 Pyrometer EGT Gauge Installation 4 SECTION 3 Transmission Temp Gauge Installation 5 SECTION 4 Fuel Pressure Gauge Installation 6 SECTION 5 HPOP Gauge Installation 8 SECTION 6 Installing The Pillar Pod 9 SECTION 7 Connect to Power 11 GlowShift Installation Guides are designed so that you don’t need to be a professional mechanic to install our products. Whether you’re a beginner or a seasoned pro, we’ll walk any Do-It-Yourselfer through every step of the process for installing our gauges, gauge pods and accessories. The custom gauge package featured in this guide is a popular combination gauge and pod set for the 1999-2007 Ford Super Duty F-250 and F-350 with a 6.0L or 7.3L Power Stroke. Before getting started, confirm you have the tools and accessories below and let’s get to work. For MaxTow® Gauges, the wire colors on the gauge power harnesses are different than what appears in this installation guide. Additionally, for the Boost Gauge, please follow the same steps but instead of installing the brass compression fittings and boost line, thread the 1/8-27 NPT boost sensor into your desired location and tighten with a 22mm Wrench. Please note that in some applications additional adapters may also be required. Wiring Schematic Red: 12v Constant Source (+) White: 12v Ignition Switched Source (+) Orange: 12v Headlight Switched Source (+) Black: Vehicle/Engine Ground (-) TOOLS & ACCESSORIES NOT INCLUDED OPTIONAL ADD-ONS AND ADAPTERS SOLD SEPARATELY AT GLOWSHIFT.COM • Safety Glasses & Gloves • Assorted Wrenches • Socket Set • Flat Head Screwdriver • Phillips Screwdriver • Center Punch • Drill & Drill Bits • Tap Handle • Multi-Meter/Test Light • Wire Strippers & Crimper • Shop Vacuum • 3 or 4 Gauge Wiring Kit • MAP Line Boost T-Fitting Adapter • Expandable Circuits • 1/8-27 NPT Drill and Tap Set • HPOP Gauge Wiring Harness • 7.3L Fuel Pressure Adapter • 6.0L Fuel Pressure Adapter • Pen Magnet • Panel Pop Tool • Cutting Oil • Pick Tool • Zip Ties • Grommet • Drain Pan • Teflon Tape • Wire Connectors • Anti-Seize • Transmission Fluid CHECK OUT THE FULL INSTALL VIDEO FOR THIS POWER STROKE: GLOWSHIFT.COM/60FORD GLOWSHIFT.COM/73FORD

RkJQdWJsaXNoZXIy MTIxODAy