1998-2002 Dodge Ram Cummins 5.9L Cummins Gauge Install Guide

1998.5-2002 INSTALLATION GUIDE GlowShift.com © GlowShift Gauges, LLC | All Rights Reserved DODGE RAM 24V 5.9L CUMMINS TABLE OF CONTENTS SECTION 1 Boost Gauge Installation 1 SECTION 2 Pyrometer/EGT Gauge Installation 3 SECTION 3 Transmission Temp Gauge Installation 4 SECTION 4 Fuel Pressure Gauge Installation 5 SECTION 5 Preparing The Pillar Pod 6 SECTION 6 Mounting The Pillar Pod 7 SECTION 7 Connecting to Power 8 • Safety Glasses & Gloves • Assorted Wrenches • Socket Set • Flat Head Screwdriver • Phillips Screwdriver • Center Punch • Marker • Drill & Drill Bits • Tap Handle • Tape Measure • Multi-Meter/Test Light • Wire Strippers & Crimper • 3 Gauge Wiring Kit • Boost Bolt Adapter • Banjo Bolt & Snubber Valve Combo Adapter • Transmission Test Port Adapter • Shop Vacuum • Pen Magnet • Panel Pop Tool • Cutting Oil • Pick Tool • Zip Ties • Grommet • Drain Pan • Teflon Tape • Wire Connectors • Anti-Seize • Transmission Fluid • Expandable Circuits • 1/8-27 NPT Drill and Tap set TOOLS & ACCESSORIES NOT INCLUDED OPTIONAL ADD-ONS AND ADAPTERS SOLD SEPARATELY AT GLOWSHIFT.COM GlowShift Installation Guides are designed so that you don’t need to be a professional mechanic to install our products. Whether you’re a beginner or a seasoned pro, we’ll walk any Do-It-Yourselfer through every step of the process for installing our gauges, gauge pods and accessories. The custom gauge package featured in this guide is a popular combination gauge and pod set for the 1998.5-2002 Dodge Ram 2500 & 3500 with a 24v 5.9L Cummins. Before getting started, confirm you have the tools and accessories below and let’s get to work. CHECK OUT THE FULL INSTALL VIDEO FOR THIS CUMMINS: GLOWSHIFT.COM/9802RAM For MaxTow® Gauges, the wire colors on the gauge power harnesses are different than what appears in this installation guide. Additionally, for the Boost Gauge, please follow the same steps but instead of installing the brass compression fittings and boost line, thread the 1/8-27 NPT boost sensor into your desired location and tighten with a 22mm Wrench. Please note that in some applications additional adapters may also be required.