2010-2018 INSTALLATION GUIDE GlowShift.com © GlowShift Gauges, LLC | All Rights Reserved RAM 6.7L CUMMINS SECTION 1 Boost Gauge Installation 1 SECTION 2 Pyrometer EGT Gauge Installation 2 SECTION 3 Transmission Temp Gauge Installation 3 SECTION 4 Fuel Pressure Gauge Installation 4 SECTION 5 Rail Pressure Gauge Installation 6 SECTION 6 Installing the Pillar Pod 7 SECTION 7 Connecting to Power 9 TABLE OF CONTENTS For MaxTow® Gauges, the wire colors on the gauge power harnesses are different than what appears in this installation guide. Additionally, for the Boost Gauge, please follow the same steps but instead of installing the brass compression fittings and boost line, thread the 1/8-27 NPT boost sensor into your desired location and tighten with a 22mm Wrench. Please note that in some applications additional adapters may also be required. Wiring Schematic Red: 12v Constant Source (+) White: 12v Ignition Switched Source (+) Orange: 12v Headlight Switched Source (+) Black: Vehicle/Engine Ground (-) TOOLS & ACCESSORIES NOT INCLUDED OPTIONAL ADD-ONS AND ADAPTERS SOLD SEPARATELY AT GLOWSHIFT.COM GlowShift Installation Guides are designed so that you don’t need to be a professional mechanic to install our products. Whether you’re a beginner or a seasoned pro, we’ll walk any Do-It-Yourselfer through every step of the process for installing our gauges, gauge pods and accessories. The custom gauge package featured in this guide is a popular combination gauge and pod set for the 2010-2018 Ram 2500 & 3500 with a 24v 6.7L Cummins. Before getting started, confirm you have the tools and accessories below and let’s get to work. • Safety Glasses & Gloves • Assorted Wrenches • Socket Set • Flat Head Screwdriver • Phillips Head Screwdriver • Center Punch • Drill & Drill Bits • Tap Handle • Multi-Meter/Test Light • Wire Strippers & Crimper • Shop Vacuum • Pen Magnet • 3 Gauge Wiring Kit • Splice Connectors • Expandable Circuits • 1/8-27 NPT Drill and Tap Set • Boost Bolt • 1/2” Transmission T-Fitting Adapter • Snubber Valve • Fuel Big Line Kit • Rail Pressure Harness • Panel Pop Tool • Cutting Oil • Pick Tool • Zip Ties • Grommet • Drain Pan • Teflon Tape • Wire Connectors • Anti-Seize • Transmission Fluid • Pipe Cutter • Deburring Tool CHECK OUT THE FULL INSTALL VIDEO FOR THIS RAM: GLOWSHIFT.COM/1018CUMMINS
RkJQdWJsaXNoZXIy MTIxODAy